|
|
|
 There's a fine line between cockiness and confidence. Confidence is one of the major keys to success and happiness in life. As long as one can carefully stay on the right side of the line, staying connfident while remaining humble, and ego can be quite beneficial. - Karthik [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
cRIO connection error
I am connecting from a mac with a windows partition. I enter this partition and I am able to connect to the modem, but not the cRIO. I am still able see the camera for some reason. Could anyone help me?
|
|
#2
21-02-2012, 22:53
|
||||
|
||||
|
Re: cRIO connection error
assuming by modem you meant radio, then you may want to check the cables you are using between the radio and the cRIO. additionally, make sure the cRIO IP is set to 10.te.am.2 in your robot project.
For example, I am on 418, so my cRIO is at 10.4.18.2 . good luck |
|
#3
21-02-2012, 23:00
|
|||
|
|||
|
Re: cRIO connection error
Another computer works with the robot.
|
|
#4
21-02-2012, 23:07
|
||||
|
||||
|
Re: cRIO connection error
Is the Macs IP address correct? It should be 10.te.am.9
|
|
#5
23-02-2012, 07:49
|
|||
|
|||
|
Re: cRIO connection error
Yes, I have checked every thing about the IP but I still have the same problem
|
|
#6
23-02-2012, 10:35
|
|||
|
|||
|
Re: cRIO connection error
Have you tried connecting your computer straight to the cRIO with a crossover cable? Can you ping the cRIO from the computer?
Good luck, Oliver Last edited by linuxboy : 23-02-2012 at 10:44. Reason: Read previous posts more closely |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
