Heads up: your bumpers as shown here are
ILLEGAL as per rule <R35>.
<R35>: Teams shall display their team number on the Bumpers in
four locations at approximately 90° intervals around the perimeter of the Robot. The numerals must be at least 4 in. high, at least ¾ in. in stroke width, and be either white in color or outlined in white. Team numbers must be clearly visible from a distance of not less than 100 ft, so that judges, referees, and announcers can easily identify competing Robots.
Question on 2/8/12 by Team 1619:
Quote:
|
Originally Posted by Official Q&A
Q. Does R35 limit the team number quantity to exactly four locations? For instance, if one side of the robot has two short bumpers separated by a gap, can the complete team number be put on both of those bumpers? Thus, there'd be two complete team numbers on one side of the robot.
A. Rule [R35] requires that the team number be displayed in four locations, no more or fewer.
|
Your bumpers appear to feature your number five times.
FIRST will continue searching for rules and procedures to keep us from hurting ourselves. However, none of this will substitute for judicious application of common sense. - Richard Wallace [more] 
23-02-2012, 02:06
Threaded Mode