|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
|
|||||
|
|||||
|
Re: Buttons on Dashboard (please help)
The robot can't read the Dashboard directly, but the Dashboard can send data to the robot. You'll have to open a UDP (or TCP) socket on the robot, and send to that socket from the Dashboard program.
It might be easier to use the Cypress PsoC I/O that the Driver Station and WPIlib routines already support. You don't have to have a physical switch; the I/O tab on the Driver Station gives you access to an array of emulated on/off switches and analog values. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|