Partial code deployment problem

[Alan Anderson]

Originally Posted by mickey

I reformatted the controller and I could deploy code once. When I use the run style of deployment, it seems to refresh the system different than that of stand-alone deployment so that I can redeploy code iff I use run deployment.

Check your CPU usage on the Driver Station's Charts tab. It sounds like your program might be using up all the processor time and not give the framework a chance to recognize that you want to load a new program. To verify that as the problem, turn on the "NO APP" switch and reboot the cRIO, then see if it will let you load code to run at startup. Make sure you turn the switch back off before letting it reboot after reloading.