|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#23
|
||||
|
||||
|
Re: Jaguars vs Victors
Correct he Jag 40A limit is implemented in Firmware:
http://www.ti.com/lit/ug/spmu130c/spmu130c.pdf Its a 1mOhm 4W resistor via an opAmp into the ADC3 on the Jag processor. Do we have source code for the Jag firmware ? If so we could relax the constraints they have Though this might violate FIRST rules? Also in the same document you'll see that the Jag has 4 empy slots for 4 more MOSFETS which would make it like a Victor - looks like a Jag IS a Victor with 25% missing MOSFETs and a procesor. Does anyone have a similarly detailed spec sheet on Victors to conclude a definitive comparison of the two? There is charm in pursuing everything to its atomic structure - did someone already say that ? Dean |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|