FRC 701 - RoboVikes 2012 Build Video

One question: If you took the horns off your ball collector, will it fit under the bridge? It looks like it won't fit with the horns on, but possibly without the horns. This could be useful later on for gathering balls fro underneath, and lifting the bridge for a partner on the other side.

[Steven Sigley]

As far as i know, that ball collector is being redesigned to be able to lower the bridge while also holding a robot on top, I'm not sure about that idea though of shortening the horns as it would possibly hurt our ability to lock a robot in on top of us, but it does sound useful...

[bEdhEd]

And if you want to see our progress and failures:

http://www.youtube.com/watch?v=1q65MRAJTD0

[bEdhEd]

Originally Posted by SuperNerd256

One question: If you took the horns off your ball collector, will it fit under the bridge? It looks like it won't fit with the horns on, but possibly without the horns. This could be useful later on for gathering balls fro underneath, and lifting the bridge for a partner on the other side.

This is a bit late, but I finally started my forum account, so.....
To answer your question, observe these videos

http://www.youtube.com/watch?v=wvmyemana

https://picasaweb.google.com/1061686...71311554800066

I was the head designer and driver for this robot (plus editor and shooter of the video) and i modified our intake system so our horns can fit under the bridge and could be used as bumper holders. The stacking did take lots of practice, but after a few sucessful stacks, it was a breeze.

Awesome! Thanks man! Good luck in 2013!

[MrTechCenter]

I never did tell you how fun it was to have you on our alliance at CalGames. You guys were amazing an defender and balancer. I can't wait to see you guys at Sac again this year!

[Jacob.B]

Can you make Truck Town Thunder a video!? That was awesome!

Originally Posted by Jacob.B

Can you make Truck Town Thunder a video!? That was awesome!

I believe Jellery was talking to me about making a T3 video.

Also, congrats on your 11th post!

[Jacob.B]

Eventually I will have more posts than you!

[Nick Lawrence]

I can't believe I haven't seen this robot before now.

That is one cool bot. I have to ask though, what did your shooting accuracy turn out to be?

-Nick

[Doug G]

Not too terribly accurate. If positioned correctly in the key, it would make 1 of 2 typically. It could only hold two balls at a time. In auto mode it would score half of the time. Once out of every 4 matches, we would make both auto shots. It did a great job of tracking down balls on the other side of the field and passing them to the offense.

The bot was built to balance and the drivers were really good at it, even with a piggyback'd robot on it.

[Doug G]

Here's a video from one of our Qualification matches from Spokane Regional...

http://www.youtube.com/watch?v=ShVkw9LyTM0