|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
|
|||
|
|||
|
Re: Robot Stops Drive Control Without Being Programmed
If you are running the SmartDashboard, I recommend you put:
SmartDashboard.putData(Scheduler.getInstance()); somewhere in your code. That way, you can see what commands are running on the robot, and see if one is taking over when the button is held. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|