How do I replicate frc field network back at school

[BitTwiddler]

Originally Posted by mryeagle

Our issues began and ended while we were in teleop on the field.
Our driver reported, and it was obvious that our bot would suddenly launch into reverse at the beginning of teleop and the oss of drive control quickly ensued.
Any ideas?

This may sound a bit in left field but something similar happened to us in 2010. We discovered a ground wire had come loose in our driver controls and caused all the joystick readings to go haywire. Happened in teleop mode even though autonomous worked fine.

[mryeagle]

Originally Posted by BitTwiddler

This may sound a bit in left field but something similar happened to us in 2010. We discovered a ground wire had come loose in our driver controls and caused all the joystick readings to go haywire. Happened in teleop mode even though autonomous worked fine.

Our driver station is pretty simple, and I don't think this is the issue, but that's a new item to check!!!

[Anupam Goli]

You can download the FMS Lite and use that to see if it is an issue perhaps with your communication to FMS.