|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
|
||||||
|
||||||
|
Bosch Pinion Numbers
The Bosch pinion is still metric. It is a Module 0.7 [mm/tooth) with 15 teeth. The pitch diameter is 10.5mm (Pitch Dia = # of Teeth* Module). The module is the same as previous years, just a different number of teeth.
Edit: I have been digging deeper and the module may not be 0.7, but it might be 0.75. I will confirm tonight and post my findings in the morning. Last edited by Paul Copioli : 06-01-2003 at 15:46. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Trade - have Bosch gearboxes, need motors | Andy Baker | Motors | 0 | 24-01-2003 08:32 |
| BOSCH motor pinion pitch | Matt Reiland | Technical Discussion | 2 | 10-01-2003 09:26 |
| Chiaphua gearing (Chippy and Bosch) | honky | Motors | 3 | 31-01-2002 10:28 |
| Bosch Extrusion | Tony G. | Technical Discussion | 4 | 11-01-2002 19:04 |
| Bosch Extrusion | Tony G. | Technical Discussion | 0 | 10-01-2002 10:26 |