|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#13
|
||||
|
||||
|
Click enable lose comms
Just had a similar problem and sure enough, you're trouble shooting recommendations worked. We were pressing the Enable button on the driverstation (the soft button) and then losing comms immediately. I had somebody eyeball the robot and it turned out that when I pressed the Enable button, it looked like power cycled on the robot. We noticed an error indication on a drive wheel Victor, so we replaced that Victor. We're back in action! Thanks folks!
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|