|
|
|
 Announcers don't keep the score. They are fairly outgoing people, make witty remarks, and wear goofy shirts. We can't take them too seriously. :) - Andy Baker [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Announcers don't keep the score. They are fairly outgoing people, make witty remarks, and wear goofy shirts. We can't take them too seriously. :) - Andy Baker [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#2
12-03-2012, 17:52
|
|||
|
|||
|
Re: Auto Code NOT Running (as expected)
Left and right motors are never set in your auto loop. If you open it, leave the safety enabled, and don't update it, the RobotDrive will complain and set it to zero.
If you set the left right drive, I predict the error will go away. Other choice is to disable the safety. This is primarily there to make debugging safer and isn't required by the field. If debugging with it off, the robot should be on blocks since a breakpoint will leave drive motors running. I couldn't tell if you had a Kinect issue or not. Please summarize the symptoms. Greg Mckaskle 
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
