pic: 3928 Swerve Module

[Aren_Hill]

Originally Posted by MattC9

So what goes in between the CIM and the colson? And did the colson come with that big of a bore or did you have to bore it out you're self's?

In between the Colson and the CIM there are 12x r3 bearings (6 on each side) running on a 4140 HT steel sleeve that is over the CIM, some grooves in this sleeve retain the wheel laterally.

that sleeve is what i got to use a 2.5" drill bit on

here are more pictures:
http://www.chiefdelphi.com/media/photos/37675?
http://www.chiefdelphi.com/media/photos/37674
http://www.chiefdelphi.com/media/photos/37673