Digital Sidecar Problem

[Codec]

Originally Posted by Mark1153

I am assuming that you are using the photoelectric sensor that came in the kit, although other will be very similiar.

It is indeed

Originally Posted by Mark1153

This wire will get attached to the Power Distribution Board
Brown is positive - so connect it to a red power wire
Blue is negative - so connect it to a black power wire

Check

Originally Posted by Mark1153

Now check your PWM cable
take the black wire and connect it to the white wire on a PWM cable, and attach it to your DIO - you pick a slot

Check

Originally Posted by Mark1153

You can also check to see if the sensor is working because the light will change color, you can adjust the sensitivity by using a small screwdriver

First thing we tried

The problem seems to be getting the input from the sidecar to the code, I will check the cable to the crio, we are using the new lightweight one.

It may spin to fast for the sensor, but even with a simple switch I am getting no input