Digital Sidecar Problem

FIRST like life is what you make of it, if you would rather go through FIRST worrying about what other teams do to make their robots, then your destined for disappointment. if you go through FIRST making the most of it doing the best you and your team can then it doesn't matter what other teams do. - Mike Schroeder [more]

		Chief Delphi > Technical > Electrical
Digital Sidecar Problem

Thread Tools

Rate Thread

Display Modes

13-03-2012, 15:44

Codec

Team 1418-Programming & Electronics

AKA: Shayne

FRC #1418 (FIRST Robotics Team 1418)

Team Role: Programmer

Join Date: Jan 2012

Rookie Year: 2004

Location: Falls Church, VA

Posts: 10

Codec is an unknown quantity at this point

Re: Digital Sidecar Problem

This is what I mean by "basic switch" I also tried twisting the wire together.

I am using the example Simple Digital Input vi
Front Panel:

Code:

Also, I was told that the 4-slot and 8-slot had the same amount of memory, I was wrong. My bad

Quote:

Originally Posted by Dr. Fancypants

We found that one side of our sidecar ribbon cable had become unclipped, causing sporadic communications issues. A quick squeeze in the vise got it working like new again. Might want to check that?

I checked the cable and the clips were fine. Thanks for the suggestions though

Last edited by Codec : 13-03-2012 at 15:48.

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 05:46.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.