Camera Image Not Sent Over Wireless Connection

[AlexD744]

Originally Posted by Roceres

Our team had a similar issue. We were able to get a camera image tethered in our pit, but as soon as we got into the arena there was no camera on the Dashboard for our drivers. Although, we were able to get a camera image tethered and through wireless at our school shop before we flashed the D-Link Wireless Bridge for the competition. With the problem at hand, we tried resetting our camera and re-flashing the D-Link, but still had no success. I borrowed a loner camera from the First organizers and like magic a new camera worked.

I am using a non-classmate driver station. I recently realized after, that I did not install a Utilities Update 2.0 (2262) for the non-classmate driver station. I wonder if that could fix this weird issue. The update says: Setup Axis Camera Tool - Axis 206 camera loses communication after power cycle.
Assuming this also works for the M1011.

That sounds about as close to the problem that we're having as I've heard. We finally decided to try using last years camera (the 206) and it seems to work perfectly. This is very strange. I'll mention the utilities update to our programming mentor, as it couldn't hurt to have two camera's ready to go at competition, if that fixes the M1101's problem. Thank you for your help!!!!!