|
at Peachtree Regional, cRIO overloading, Help
We are team 1683 TechnoTitans, and today was our first day at peachtree regional.
Our programmers programmed the autoaiming and auto RPM adjusting based on the distance we are getting from our camera. It went fine when we were testing at school when we just had our shooters. But today when we put it on the robot, our cRIO overloaded, and it is running at 100%. We cannot get any update on the dashboard (which includes any camera images, and RPM, encoder feedbacks.)
We are in desperate help right now, we will take any suggestions and try it out tomorrow.
Thank you very much
__________________
2011 Peachtree Regional Innovation in Control Award
2011 Peachtree Regional Semifinalist
2010 Peachtree Regional Champion
2010 Peachtree Regional Creativity Award
2008 Peachtree Regional Finalist
2007 Bayou Regional Champion
2006 Peachtree Regional Finalist
2005 Peachtree Regional Quarterfinalist
|
Work hard. Then work even harder.
Work until there is nothing left to work on, then work more. - RoboChair [more] 
Threaded Mode