|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Cypressboard voltage
I wired a pot into the cypress board and Its working,but when I took a voltage test I am only reading 3.321 volts on the driverstation and multimeter, is there anyway to get the full 5 volts that is supplied from the usb port?
|
|
#2
|
||||
|
||||
|
Re: Cypressboard voltage
There is a jumper setting that allows you to change VDDIO from a 3.3V supply to a 5V supply; see the notes on VDDIO in the FRC spec sheet:
Quote:
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|