RSL Mounting

[Billfred]

Originally Posted by CalTran

We're not a fan of the provided mount...

Obligatory: What mount are you talking about? We've historically used a pneumatics regulator bracket for the signal light, simply because it's there and easy. But Akash is right--if you're compliant, you're compliant.

[Al Skierkiewicz]

Cal,
You may use whatever method you choose to mount the light and meet all other robot rules. We have often used a punch to make a hole in scrap aluminum and then rivet tot he robot frame somewhere that meets the visibility requirement.

[CalTran]

Originally Posted by Billfred

Obligatory: What mount are you talking about? We've historically used a pneumatics regulator bracket for the signal light

That's the one we've been using as well, but this year we wanted a sturdier mount because the light has had a tendency to fall out as we go over bumps and bridges (And fall off of said bridges...)

We're going with just making a hole in the side of our shooter and sticking it there.

[Nate Laverdure]

Originally Posted by CalTran

We're going with just making a hole in the side of our shooter and sticking it there.

A 15/16" or 1" paddle bit will work nicely.