|
|
|
 Every team should have a rule about not shouting "ROBOT!" when transporting a robot around the pits/arena. - frasnow [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools |
Rating: 
|
Display Modes |
|
|
|
| Every team should have a rule about not shouting "ROBOT!" when transporting a robot around the pits/arena. - frasnow [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools |
Rating:
|
Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
Re: repurpose of kwikbyte DS
Just wondering if there's been any development on this? I randomly had this same idea yesterday and got my hands on one of the DS's. Ironically this post came up while googling documentation on it.
|
|
#2
27-03-2012, 08:05
|
||||
|
||||
|
Re: repurpose of kwikbyte DS
our season just ended this past weekend, so I have time to look at it. I'm not going to try to reflash it until I either have a spare and some idea of where to go for a kernel and goodies, or if someone else is successful. I can use it for data acquisition as it is (with the FIRST software in it).
I'm also having no luck finding the USB key/dongle for it in our robot room, so that would also be an issue. Looks like a good idea, but I think I had it too late.... Schnabel: too bad we didn't have this discussion last week. We could have compared notes while our teams were at Niles (in the quarter finals together)... Last edited by fovea1959 : 27-03-2012 at 08:19.
|
|
#3
27-03-2012, 10:28
|
||||
|
||||
|
Re: repurpose of kwikbyte DS
Here is a great purpose for the old KwikByte DS.
You can still use it as a DS for robot demos and such. That is what we do. In fact you buy them from AndyMark. I talked to Andy Baker a year or so ago about selling them at a discount price to the FRC community for demo bots and such. I'll let Andy finish the rest of the post.....
|
|
#4
27-03-2012, 19:37
|
|||||
|
|||||
|
Re: repurpose of kwikbyte DS
AndyMark is sold out now. I assume this since they don't have it listed any more, however I did find a lot of really cool info on it last night. Firstly I opened it up and noticed that it is in fact powered by an ARM processor. I confirmed this by going to Kwikbyte's website and looking at the specs. Then I noticed a link to "Driver Station Challenges". Pretty much it looks like they designed this thing to be hacked providing instructions and necessary equipment to upload information to the flash on it. They even have instructions on how to change how it boots (specifically how to change the logo it shows). It really looks like they had this in mind from the start, yet stopped setting everything up right about Kickoff time in 2009. While yes it still works with the robot, why couldn't we hack it to be a robot controller? It would be funny to have two of these on either end of the link, one telling the other what to do, and the other doing it.
|
|
#5
11-06-2013, 14:24
|
|||
|
|||
|
Re: repurpose of kwikbyte DS
Call me a thread vampire, but I managed to get the documentation(link) with links to the original firmware. If only I could get the pinout for that clip adapter, since I have a serial port on my pc.
Looks like a summer project!
|
|
#6
11-06-2013, 14:46
|
||||||
|
||||||
|
Re: repurpose of kwikbyte DS
Quote:
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
