Bridge reset

[JP Carlin]

One last question and then i should have this pretty much down.

Ive only used these equations using metrics before so if
Torque=Force * Distance * sin of angle

Am i using distance as inches or feet when calculating this

[kevin.li.rit]

Originally Posted by JP Carlin

One last question and then i should have this pretty much down.

Ive only used these equations using metrics before so if
Torque=Force * Distance * sin of angle

Am i using distance as inches or feet when calculating this

Either one.

106lbs with a 1 ft lever arm would be 106Ft*lbs or 1272inch*lbs.