Go to Post ... if there is no standard against which you determine success, then you can never fail. - dlavery [more]
Home
Go Back   Chief Delphi > Technical > Electrical
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #13   Spotlight this post!  
Unread 02-04-2012, 19:51
rbtying rbtying is offline
Team 846 Chief Software
AKA: Robert Ying
FRC #0846 (Funky Monkeys)
Team Role: Programmer
 
Join Date: Jan 2012
Rookie Year: 2011
Location: San Jose, CA
Posts: 9
rbtying is an unknown quantity at this point
Re: Intermittent connection on field only

Team 846 had similar problems at New York Regional, which were resolved by swapping the power distribution board. Though it will not pass inspection, you can try mounting a spare PDB as a custom circuit off of one of the 40A breaker slots, and powering the radio off of that.

We will likely have more data on this phenomena later, as we plan to scope out the failed power distribution board under load. It is perhaps notable that we have measured large ripple voltages (up to 0.6v on a WORKING board) on the 5v supply output, and that this is likely a marginal condition for the D-Link, which expects 5v +/- 5%.
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 20:43.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi