|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
New software??
Hello:
I've heard too many rumors about the new parallax (forgive my spelling) software. I would like hard evidence, maybe a link or news release, and possibly some advantages of using the new stuff. Thanks alot for the help and time!!! |
|
#2
|
|||
|
|||
|
team update 1 page #3:
PBASIC 2.5 UPDATE The version PBASIC 2.5 editor will not be released by Parallax until Friday, January 10th. On Friday, it will be released in beta form to FIRST teams only and will be available exclusively on the Innovation First, Inc. website (www.innovationfirst.com). Due to this delay, we have released a second version of the default code that does not require the new editor. DEFAULT CODE UPDATE There are two versions of default code loaded in the 2003 Robot Controller. The default code (DEF) is for 2-Stick driver control. The default code (USER) is for 1-Stick driver control. The default code shipped in your Robot Controller (both USER and DEF) does not contain the code that stops PWM devices with limit switches. We recommend you re-load the default code (located at www.innovationfirst.com) if this feature is needed. The default code shipped also contains test code. This is activated with sw2 of the channel switch. If you intend to use a channel dongle to access alternate channels, we recommend you re-load the default code (located at www.innovationfirst.com). Refer to the competition port pinout guide on the documentation page for information on accessing alternate channels. |
|
#3
|
||||||
|
||||||
|
Advantages:
if/then/else - more logical programming style SELECT - do different things based on ranges of numbers Do/Loop - no more annoying goto MainLoop RobEmu 1.09 is done and supports all these new things. I'll be releasing it soon. Anyway, I assume you're just worried about spending all kinds of time writing code in the new syntax and not being able to use it. Don't worry! Worst case scenario, I'll write a little C app to convert the new syntax to the old. Before anyone doubts this, know that I've already done most of it internally to RoboEmu. --Rob |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Interesting "4D" planning software. | Madison | General Forum | 2 | 22-10-2003 09:26 |
| SCRRF Design Classes | Redhead Jokes | Southern California Regional Robotics Forum | 0 | 10-07-2003 17:29 |
| which software | Ryan Foley | 3D Animation and Competition | 5 | 01-03-2003 23:39 |
| any one get the software yet?! | activemx | 3D Animation and Competition | 17 | 28-11-2002 19:06 |
| software software software | archiver | 2001 | 5 | 24-06-2002 00:21 |