Smart dashboard Video feed

[Ian McShane]

We have been trying to get feed from the camera to the smart dashboard. For some reason we can not even ping the camera through the 2 ethernet port Crio. suggestions? i think we are doing all the right steps but can someone post all the steps from where the camera has been reset.

[Ginto8]

Our process goes like this:

1. Connect the driver station to the bridge
2. Configure the driver station's IP (should be 10.te.am.*, we use 10.te.am.5) and subnet (should be 255.0.0.0)
3. Determine the Camera's IP. This should be in the 10.te.am.11-20 range.
4. Enter the camera's IP into WPICameraExtension's IP property
5. Wait for camera feed to appear (usually takes a few seconds)