Kinect with Labview

[Mark McLeod]

So, you're getting an error message about the Kinect Server?
There is a button on the Operations Tab that will restart it.

In addition to knowing what the error message says, there are a couple of places to look for Kinect status that would be helpful to know:

• On the Operation tab is a Kinect box outlined in (red or green) and the silhouettes for two people (gray or green)
• On the Driver Station Diagnostics tab, the Kinect is listed next to a light (gray, red or green). To the right is a button that will restart the Kinect Server.
• There is also a Kinect status at the very bottom that should have some text message beside it.

Depending on what errors and statuses you see there are various things to try to clear up the problem.

If the Kinect Server is failing, then you can run it in debug mode and get more information.
It's located on your PC under C://Program Files/FRC Kinect Server/KinectServer Debug Mode