Inovation First FRC Robot Controller

[SeanPerez]

ok so i have got all the wiring finished and turned it on and it works. They can comunicate between both the OI and RC.

I have also installed these:

•MPLab http://www.microchip.com/pagehandler...family/mplabx/
•C18 compiler. http://www.microchip.com/stellent/id...ame =en010014
•IFILoaded, attached since the site appears to be done or gone. It would normally be at www.ifirobotics.com
•Sample code. Since you'll be using C18 v3.x, the IFI default code won't work, so you'll need to use Kevin Watson's version. ifi_frc_simple.zip from http://kevin.org/frc/
•You should only have to modify code in teleop.c.

Can someone help me configure my settings in mplab so that i can build it properly?

Also what file do i open to open the project in mplab.




Just some info:

MPLAB X IDE v1.10
MPLABC18 v3.4
IFI LOADER V1-1-0
im using the code ifi_frc_simple.zip from http://kevin.org/frc/


Thanks