|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: Joysticks
Quote:
![]() But how many buttons do you need, minimum? |
|
#2
|
|||
|
|||
|
Re: Joysticks
I donated my Microsoft Sidewinder Precision 2 to the team for use as the OP stick. Its got 4 axis (X,Y, and a Z that you twist the stick for, and a throttle), something like 10 buttons, and a hat.
![]() You can really just use any usb joystick.. EDIT: Okay, 8 buttons. Last edited by Brandon_L : 29-05-2012 at 12:23. |
|
#3
|
|||||
|
|||||
|
Re: Joysticks
A USB gamepad such as the Logitec has two little joysticks, and a bunch of buttons....and they're very compact. Try it you'll like it.
|
|
#4
|
||||
|
||||
|
Re: Joysticks
If you just need the buttons you could always try ESTOP's I/O module and make your own button board.
Dont forget you can use more then 2 USB inputs, and so youd still have both joysticks, but with an added bonus of an easy to use, custom buton board. |
|
#5
|
|||
|
|||
|
Re: Joysticks
Are team uses a Logitech attack 3 put into a radio shack project box. It works well for an actuator joystick.
|
|
#6
|
||||
|
||||
|
Re: Joysticks
Generally my students have just used a USB game pad, ours happens to be an xbox controller, whenever they have needed a collection of buttons without the joystick for the operator.
|
|
#7
|
|||
|
|||
|
Re: Joysticks
Logitech extreme 3d pro has 6 buttons on the side, throttle, 4 buttons on the stick, hat switch, trigger and side button, and a twist stick.
![]() Basically the KOP joystick but better... But it's height is 7 3/4 inches |
|
#8
|
||||
|
||||
|
Re: Joysticks
That is the KOP Joystick?
|
|
#9
|
|||||
|
|||||
|
Re: Joysticks
No, it isn't. The KOP joystick is a Logitech Attack 3, this is an Extreme 3.
While similar, the Extreme 3 has an extra button and a mini-joystick (I don't know the correct term) on the top. Plus this has a twist stick, the KOP one does not. Hope this helps! ![]() |
|
#10
|
|||
|
|||
|
Re: Joysticks
Its usually referred to as a hat switch or something like that, I just call it a hat.
|
|
#11
|
|||
|
|||
|
Re: Joysticks
Our team has used Logitech Attack 2's in the past, and they have been rather reliable and very applicable. This year, one of our drivers used an x-box controller to control the drivetrain and the other driver used an attack 2 to control ball intake, elevator, & shooter. In my opinion, the factors that influence what controller you go with should be the game itself, and driver preferences.
|
|
#12
|
||||
|
||||
|
Re: Joysticks
Quote:
![]() |
|
#13
|
|||||
|
|||||
|
Re: Joysticks
Having driven with a few types of joysticks and gamepads, the Logitech Attack 3's are my least favorite by far.
Over the past 3 years, we've used: -Logitech DualAction gamepad (all three years) -Logitech F310 or Xbox (identical functionally, F310 is better to me, two years) -Custom Cypress-based box (never will use Cypress board again) -Custom box based on Logitech Precision (no analog inputs, otherwise very good) -Custom box based on uHID (very very good, would use uHID again) I personally prefer the (very old) CH Flightsticks in terms of actual joysticks, as I like the spring feel much more than that of the Attack 3. I would highly recommend the Logitech Dual Action and F310 gamepads, as well as the uHID, to any team. |
|
#14
|
||||
|
||||
|
Re: Joysticks
Andrew,
Is there anything special one has to do to use the Logitech DualAction gamepad with the base FRC Labview software? Last edited by marccenter : 30-05-2012 at 10:58. Reason: clarity |
|
#15
|
||||
|
||||
|
Re: Joysticks
It depends what you're looking for when you say better. Attack 3 has way more buttons than I need anyway, so the smaller footprint and lower cost is better for our uses.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|