|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#16
|
||||
|
||||
|
Re: How to use igus chain.
Maybe a quantum transport mechanism? :0 The heat gun required to reassemble the ball didn't get by tech inspection.
We attached our wire bundle on the outboard edge of the turret & high on the support frame: allowing a loop to hang down. We used spiral wrap to keep it compact & made sure there was no perturbations on the robot for it to hang on. We easily got +- 180 degrees. |
|
#17
|
||||
|
||||
|
Re: How to use igus chain.
I actually was actually unsure of how my theory would work until I realized a fixed point above the center of rotation would do the trick.
|
|
#18
|
|||
|
|||
|
Re: How to use igus chain.
Igus actually offers several non-linear products that may be beneficial for the application. The following links will take you to a couple of them.
http://www.igus.de/wpck/default.aspx...tband&CL=DE-en http://www.igus.de/wpck/default.aspx...7085&C=DE&L=en http://www.igus.de/wpck/default.aspx...2899&C=DE&L=en |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|