|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#13
|
|||||
|
|||||
|
Re: 3D Printer
Quote:
What is the MFG date on your cartridge? When was the last time your print tips were changed? What model machine? Quote:
I think they might be out of production though. You may want to get an ultrasonic tank anyway which is more efficient for support removal. Here are some other tanks http://cleanstation-srs.com/ Essentially all the tank does is heat to 70c and circulate the water. So as long as you find a tank that does that you are good to go. The only catch is that it must hold up to the sodium hydroxide over time. Stainless :-) Ebay may have some good deals if you find the right tank. The chemical is powdered sodium hydroxide. I get mine directly from my Stratasys reseller in a bulk case. I donate my services to the Tigertrons to make motor mounts, encoder mounts, potentiometer mounts, brackets, spacers, and other similar hardware for the last few years. I even made a whole transmission for display purposes and even scale replicas of the FIRST trophies. Here is the prototype motor mount for our 2012 practice bot. https://www.facebook.com/photo.php?f...type=1&theater There are also a bunch more projects and photos here: https://www.facebook.com/printto3d If anyone else has an questions about the Dimension/Stratasys machines I will try to help as I've operated thousands of hours on a 768 BST, 1200es SST, and Fortus 250mc. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|