Go to Post Teams must bring their own water. Water must consist of a low viscosity and at it's maximum width must not be larger than 12 in. - Bkeeneykid [more]
Home
Go Back   Chief Delphi > Technical > Electrical
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Closed Thread
 
Thread Tools Rate Thread Display Modes
  #1   Spotlight this post!  
Unread 02-07-2012, 18:43
CalTran's Avatar
CalTran CalTran is online now
MST Rolla Senior
FRC #2410 (BV CAPS Metal Mustang Robotics)
Team Role: College Student
 
Join Date: Apr 2010
Rookie Year: 2010
Location: Overland Park, Kansas
Posts: 2,419
CalTran has a reputation beyond reputeCalTran has a reputation beyond reputeCalTran has a reputation beyond reputeCalTran has a reputation beyond reputeCalTran has a reputation beyond reputeCalTran has a reputation beyond reputeCalTran has a reputation beyond reputeCalTran has a reputation beyond reputeCalTran has a reputation beyond reputeCalTran has a reputation beyond reputeCalTran has a reputation beyond repute
Re: Spikes not working - URGENT

Quote:
Originally Posted by akoscielski3 View Post
we actually started hot glueing ours in this year. but they break all the time, so idk if its worth it...
LIKE. We did the exact same thing. They had somewhat less breaking, but turned into an absolute pain for on the fly changing of the victors/jags.
__________________
Team 2410 thinks KISSing is amazing! Keep It Super Safe!
  • "You know you've been in robotics too long when you start talking to your tools." "Well, you've been in robotics CLEARLY too long when they start talking back"
  • Theory is when you know everything but nothing works. Practice is when everything works but you don't know why. On our team, theory and practice comes together - nothing works and nobody knows why.
MMR 2410 Student (2010 - 2013) | MMR 2410 Mentor (2013 - Present)
FTC Game Announcer / EmCee (2014 - Present) | FRC EmCee (2015 - Present) | FRC Referee (2016) | FTC Referee (2017)
Academic Student (Forever)
  #2   Spotlight this post!  
Unread 02-07-2012, 19:38
gyroscopeRaptor's Avatar
gyroscopeRaptor gyroscopeRaptor is offline
Registered ConfUser
AKA: Mark McGivern
FRC #3633 (Catalyst)
Team Role: College Student
 
Join Date: Dec 2010
Rookie Year: 2011
Location: Albert Lea, MN / Troy, NY
Posts: 360
gyroscopeRaptor has a spectacular aura aboutgyroscopeRaptor has a spectacular aura about
Re: Spikes not working - URGENT

We epoxied our cables in on our robot this year but the connectors are becoming worn and we had to scavenge cables from 2011 and 2012. They'll be epoxied later tonight. Thanks to everyone, and we will have pictures and video of our EOD robot after the parade.
  #3   Spotlight this post!  
Unread 02-07-2012, 19:41
rsisk's Avatar
rsisk rsisk is offline
The GURU Channel
AKA: Richard Sisk
FRC #2493 (Robokong)
Team Role: Mentor
 
Join Date: Jan 2008
Rookie Year: 2007
Location: Riverside, CA
Posts: 2,750
rsisk has a reputation beyond reputersisk has a reputation beyond reputersisk has a reputation beyond reputersisk has a reputation beyond reputersisk has a reputation beyond reputersisk has a reputation beyond reputersisk has a reputation beyond reputersisk has a reputation beyond reputersisk has a reputation beyond reputersisk has a reputation beyond reputersisk has a reputation beyond repute
Send a message via MSN to rsisk
Re: Spikes not working - URGENT

How does the hot glue affect the device? Any downside other than having to clean out the glue in order to replace the cable?
__________________
Quote:
The views expressed are mine and should not be construed to represent the views of anyone else.
  #4   Spotlight this post!  
Unread 02-07-2012, 19:41
R.C.'s Avatar
R.C. R.C. is offline
2017... Oooh Kill em, Swerve!
AKA: Owner, WestCoast Products
FRC #1323 (MadTown Robotics)
Team Role: Engineer
 
Join Date: Feb 2008
Rookie Year: 2006
Location: Madera, CA
Posts: 2,186
R.C. has a reputation beyond reputeR.C. has a reputation beyond reputeR.C. has a reputation beyond reputeR.C. has a reputation beyond reputeR.C. has a reputation beyond reputeR.C. has a reputation beyond reputeR.C. has a reputation beyond reputeR.C. has a reputation beyond reputeR.C. has a reputation beyond reputeR.C. has a reputation beyond reputeR.C. has a reputation beyond repute
Re: Spikes not working - URGENT

We've had some issues seating the PWM connectors but after they are seated. They are strain relieved and then hot glued. Never touched them since Our FIRST regional.

Rich, its really easy to just take off the hot glue, like 5 minutes worth of work.

-RC
__________________
R.C.
Owner, WestCoast Products || Twitter
MadTown Robotics Team 1323
  #5   Spotlight this post!  
Unread 02-07-2012, 20:09
gyroscopeRaptor's Avatar
gyroscopeRaptor gyroscopeRaptor is offline
Registered ConfUser
AKA: Mark McGivern
FRC #3633 (Catalyst)
Team Role: College Student
 
Join Date: Dec 2010
Rookie Year: 2011
Location: Albert Lea, MN / Troy, NY
Posts: 360
gyroscopeRaptor has a spectacular aura aboutgyroscopeRaptor has a spectacular aura about
Re: Spikes not working - URGENT

There may be some residue from the adhesive. We used epoxy, and there is definitely some residue that may have made it harder to reseat and that caused this problem to begin with. That said, the upsides (keeping a compressor working through a match vs. having it unseated and fail) far outweigh any downsides, and 99.9% of situations the cables should be glued or epoxied into their seats on both ends.
  #6   Spotlight this post!  
Unread 02-07-2012, 22:12
ratdude747's Avatar
ratdude747 ratdude747 is offline
Official Scorekeeper
AKA: Larry Bolan
no team
 
Join Date: Feb 2009
Rookie Year: 2008
Location: Madison, IN
Posts: 1,064
ratdude747 has a reputation beyond reputeratdude747 has a reputation beyond reputeratdude747 has a reputation beyond reputeratdude747 has a reputation beyond reputeratdude747 has a reputation beyond reputeratdude747 has a reputation beyond reputeratdude747 has a reputation beyond reputeratdude747 has a reputation beyond reputeratdude747 has a reputation beyond reputeratdude747 has a reputation beyond reputeratdude747 has a reputation beyond repute
Re: Spikes not working - URGENT

Another reason I like CAN... If the cable works, it will work virtually forever... Even if somebody messes up and snaps a clip, all that is needed is another clip which can quickly crimped on. Not to mention that you can never get a cable backwards and aside from the left black Jag port of the first Jag (serial CAN), you cannot get the wrong port ever. Now if they only made competition legal CAN relays... that IMHO would be awesome.
__________________
Dean's List Semi-finalist 2010
1747 Harrison Boiler Robotics 2008-2010, 2783 Engineers of Tomorrow 2011, Event Volunteer 2012-current

DISCLAIMER: Any opinions/comments posted are solely my personal opinion and does not reflect the views/opinions of FIRST, IndianaFIRST, or any other organization.
  #7   Spotlight this post!  
Unread 02-07-2012, 23:06
apalrd's Avatar
apalrd apalrd is offline
More Torque!
AKA: Andrew Palardy (Most people call me Palardy)
VRC #3333
Team Role: College Student
 
Join Date: Mar 2009
Rookie Year: 2009
Location: Auburn Hills, MI
Posts: 1,347
apalrd has a reputation beyond reputeapalrd has a reputation beyond reputeapalrd has a reputation beyond reputeapalrd has a reputation beyond reputeapalrd has a reputation beyond reputeapalrd has a reputation beyond reputeapalrd has a reputation beyond reputeapalrd has a reputation beyond reputeapalrd has a reputation beyond reputeapalrd has a reputation beyond reputeapalrd has a reputation beyond repute
Re: Spikes not working - URGENT

We use clear silicone bathroom caulk (it comes in a nice toothpaste-ish tube) for all PWM and other signal wire connectors, plus black duck tape on the radio. It's fairly sticky, and fairly easy to remove.
__________________
Kettering University - Computer Engineering
Kettering Motorsports
Williams International - Commercial Engines - Controls and Accessories
FRC 33 - The Killer Bees - 2009-2012 Student, 2013-2014 Advisor
VEX IQ 3333 - The Bumble Bees - 2014+ Mentor

"Sometimes, the elegant implementation is a function. Not a method. Not a class. Not a framework. Just a function." ~ John Carmack
  #8   Spotlight this post!  
Unread 03-07-2012, 08:10
efoote868 efoote868 is offline
foote stepped in
AKA: E. Foote
FRC #0868
Team Role: Mentor
 
Join Date: Mar 2006
Rookie Year: 2005
Location: Noblesville, IN
Posts: 1,425
efoote868 has a reputation beyond reputeefoote868 has a reputation beyond reputeefoote868 has a reputation beyond reputeefoote868 has a reputation beyond reputeefoote868 has a reputation beyond reputeefoote868 has a reputation beyond reputeefoote868 has a reputation beyond reputeefoote868 has a reputation beyond reputeefoote868 has a reputation beyond reputeefoote868 has a reputation beyond reputeefoote868 has a reputation beyond repute
Re: Spikes not working - URGENT

For future reference, seating PWM cables into a spike are a real PITA. Back when I was still wrestling with the IFI system in the pits, we had just one spike that refused to work properly. It would operate our pneumatics, but only in one direction. After wrestling with it for half an hour (compounded by the fact our electronics were mounted vertically underneath our robot's arm).

Turns out just one of the pins was not seated properly. Talk about 30 minutes of debug wasted [an important lesson learned].

Something you can do to make sure the PWM cable is seated properly is to remove the top portion of the spike case (I don't remember any warranty stickers attached here). If you tug on it a little, the top will come off. Then you can actually see the terminal, and if you thread the PWM cable through the top of the case and see it plugged in, you won't have to worry about it being seated properly. Then you can push the top of the case back on, strain relief the cable and forget about it.
__________________

Be Healthy. Never Stop Learning. Say It Like It Is. Own It. Like our values? Flexware Innovation is hiring!. We're looking for Senior Automation, Software, and System Engineers. Check us out!
  #9   Spotlight this post!  
Unread 03-07-2012, 14:12
PAR_WIG1350's Avatar
PAR_WIG1350 PAR_WIG1350 is offline
Registered User
AKA: Alan Wells
FRC #1350 (Rambots)
Team Role: Alumni
 
Join Date: Dec 2009
Rookie Year: 2009
Location: Rhode Island
Posts: 1,190
PAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond repute
Re: Spikes not working - URGENT

Quote:
Originally Posted by apalrd View Post
We use clear silicone bathroom caulk (it comes in a nice toothpaste-ish tube) for all PWM and other signal wire connectors, plus black duck tape on the radio. It's fairly sticky, and fairly easy to remove.
From what others have told me, some silicone products (like marine silicone sealants) produce corrosive gases while curing so it is best to use silicone products designed to be compatible with electronics (which will not produce the corrosive fumes). The spikes' PCBs are coated so that might protect them to some degree, but the PWM connector left unprotected since the coating would render the connector useless.
__________________
  #10   Spotlight this post!  
Unread 03-07-2012, 15:46
Ether's Avatar
Ether Ether is offline
systems engineer (retired)
no team
 
Join Date: Nov 2009
Rookie Year: 1969
Location: US
Posts: 8,125
Ether has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond repute
Re: Spikes not working - URGENT

Quote:
Originally Posted by PAR_WIG1350 View Post
From what others have told me, some silicone products (like marine silicone sealants) produce corrosive gases while curing so it is best to use silicone products designed to be compatible with electronics (which will not produce the corrosive fumes). The spikes' PCBs are coated so that might protect them to some degree, but the PWM connector left unprotected since the coating would render the connector useless.
The polymerization reaction of consumer-grade RTV silicone caulk and adhesives outgasses acetic acid. Although it is a weak acid, it is an acid nonetheless, and could cause corrosion if trapped against metal.


  #11   Spotlight this post!  
Unread 03-07-2012, 22:27
Aidan S.'s Avatar
Aidan S. Aidan S. is offline
2013 World Champions!
FRC #0610 (The Coyotes)
Team Role: Alumni
 
Join Date: Jan 2010
Rookie Year: 2009
Location: Toronto, Ontario
Posts: 71
Aidan S. is just really niceAidan S. is just really niceAidan S. is just really niceAidan S. is just really nice
Re: Spikes not working - URGENT

This is more of a reminder of the values of a well organized and carefully built electrical system (I apologize for going a bit off topic, but these tips will make any future troubleshooting easier and faster):

Troubleshooting an electrical systems can cause a lot of headaches and take up valuable time during build season and at competition. The best way to troubleshoot a good electrical system is to start before the first wire is crimped. If you start with an organized and careful approach, you can save a lot of time in the long run. Two of the easiest ways any team can do this is label every wire and component, and test and check wires multiple times before adding them to the system.

Effective labeling is a must for any electrical system. This means to label both the components and the wires, and stick to a system for all labels. For example, my team labeled all jaguars with a number, all victors with a "v" followed by a number, all spikes with a "s" followed by a number etc. This helped the electrical team to easily identify what each wire was connected to and allowed the programming team to figure out what controlled things such as motors by looking at the motor rather than tracing the wire from the motor back to the speed controller. A quick tip for labeling is to label each end of the wire and label each wire individually, instead of using the same label for things such as power and ground wires on the same component.

Proper wire construction is the cornerstone of a solid electrical system. PWM wires can be very temperamental to build, as an improper crimp can be easy to make and hard to detect, but these tips can apply for all wires. First off, it is very easy for anyone to make a mistake when crimping a PWM pin. Crimp too much of the housing and not enough wire and the wire won't conduct properly, and crimp too much wire and not enough housing and the pin can easily snap off. To remedy this, after a visual inspection, use a multimeter to test a crimp both before and after placing the pin in the housing to make sure that the pin is conductive. If its not at either time, then it's back to square one, better to be safe than sorry.

Taking these extra steps will take extra time and patience, but it is well worth it, considering how it will better prepare you for the season ahead.
__________________
2013 Galileo Division & World Champions with 1241 and 1477 #TheTheoryOfTexanCoyotes
2012 - ????: Mentor, Team 610 2009 - 2012: Student, Team 610
2013 - ????: Strategy Adviser, Team 1310

Thanks to all the great alliance partners through the years: 67, 188 x4, 191 x2, 488, 469, 578, 842, 862, 1212, 1241, 1305, 1310 x2, 1325, 1334, 1511, 1535, 1477, 1559 x2, 2122, 2168, 3161, 3360, 3396, 3476, 3609, 3756, 4124
Closed Thread


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 19:53.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi