What do YOU want in the Kit of Parts?

[ebarker]

Super easy -

It will require a rule change from the past years robot rules though.

There should be a 12V 3 or 4 amp-hour sealed battery that is used to ONLY power the radio bridge.

[Billfred]

This one's been on my list for a while: improved window motor hubs. I've seen them in just about every FRC kit, going back to 2004. In the near-decade since, FRC has seen the kit landscape change greatly...and standardize on all the mounting interfaces that these aren't. Very few shafts on modern FRC robots are bigger than 1/2", yet we always have to throw some 5/8" keyed shaft on our McMaster-Carr order if we want to use them. The #10 1.875" bolt circle is the de facto standard for sprocket mounts, yet the hub is still taking 1/4" bolts in a square.

I appreciate a good engineering challenge, but these workarounds are more or less givens. I'd love to see them updated for what's out there to hook to it.

[Mk.32]

Agreed with the above, great idea with the radio battery.
More victors and electronics in general.
More vouchers so we can pick and choose what we want for example we haven't touched the igus bag in the past 2 years.