Questions-Thoughts/Input On First Drivetrain Design

[Garrett.d.w]

Originally Posted by rcmolloy

Yeah I would assume a 3/16" rivet every half inch should do you just fine. The current pattern seems to be way overkill.

I would space them further than every half inch. I generally go for one every two inches in the main body sections, and one every inch in the corners. You can also add silicone glue under the panels to dampen vibrations.

Riveting tip: if you are riveting into tubing, make sure that there is a hole for the mandril tips to exit. This will help you avoid the "rainstick effect"

All in all, sweet drivetrain. Do you have plans for tensioning the chains?