|
|
|
 ...thinking and learning never go out of style. - Rick TYler [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| ...thinking and learning never go out of style. - Rick TYler [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
2012 Van Door Motor Circlip Goove
Hi, does anyone know what the diameter of the circlip groove in the 2012 van door motor is?
|
|
#2
12-09-2012, 01:44
|
||||
|
||||
|
Re: 2012 Van Door Motor Circlip Goove
There was a van door motor in the 2012 kit?
|
|
#3
12-09-2012, 10:44
|
||||
|
||||
|
Re: 2012 Van Door Motor Circlip Goove
No, he's probably talking about one salvaged from a scrap yard. Usually, the groves are standard sizes based on the diameter of the shaft. If you know the diameter of the shaft, you can find out what e-clip or c-clip you need to use. Also, the depth and diameter of the groove could easily be measured with a pair of digital calipers.
|
|
#4
12-09-2012, 11:50
|
||||||
|
||||||
|
Re: 2012 Van Door Motor Circlip Goove
Quote:
|
|
#5
12-09-2012, 11:59
|
||||||
|
||||||
|
Re: 2012 Van Door Motor Circlip Goove
Technical drawing of the Van Door from previous year's kit; I think the interfaces are the same for the ones they supplied last year:
http://www.usfirst.org/uploadedFiles...2016640238.pdf |
|
#6
12-09-2012, 12:10
|
||||
|
||||
|
Re: 2012 Van Door Motor Circlip Goove
Quote:
 |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
