Mounting electronics

[F22Rapture]

This year we mounted ours on Lexan using velcro and plastic zipties like so.

[IndySam]

Zip-ties work great for us, or bar-locks for old time CDers.

[z_beeblebrox]

Heavy duty Velcro is amazing for mounting electronics. They come of when you want them to and don't when you don't. It's also easy to change the mounting configuration.

[Jon Stratis]

Another option I haven't seen here is to use button-head bolts. Stick the bolt in from the bottom, slide the components over it, then put the nut on. This way, the barrier can slide over the bolt head easily, instead of getting caught on a typical socket head.

[roystur44]

We mount our components using a Pem standoff, nylon allen head screw, unthreaded shoulder spacer with flange. All components are placed using CAD into the belly pan model. We extrude the mounting holes from the components into the belly pan. Then the belly pan is punched. Our belly pan is actually the frame of our chassis. After forming the belly pan we press in the standoffs. To mount the components we screw the parts down using a nylon screw and the plastic washer. Every part is isolated from the metal frame. We cut off the end of the screw to make a flush surface on the bottom.

Here's a picture.


https://picasaweb.google.com/1177698...06907256715874