Robot wireless bridge.

[shawnz]

Hmm... When was the last time you have successfully used the robot? What setup were you using then?

Originally Posted by daniel_dsouza

JAVA note: If by not working you mean "can't deploy code", then try having only one network connection: to the network where the robot is. At least last year, our team was scratching our heads, untill we found that netbeans was trying to deploy the code to a nonexistant robot on our other (school) connection.

I've had similar issues with LabVIEW also. I'm pretty sure 10.9.7.0/24 is not used by our school, so I don't know how it could possibly get confused, but... it seems to happen sometimes.

[Mk.32]

When I say cannot connect, I mean I can't ping the robot with the CMD

[daniel_dsouza]

Originally Posted by Shawnz

Hmm... When was the last time you have successfully used the robot? What setup were you using then?

This is a very important question to ask, especially if you need to fix something ASAP.

Originally Posted by Mk.32

When I say cannot connect, I mean I can't ping the robot with the CMD

What can you ping? (AP, bridge, etc?) If you don't know an the IP, let Windows generate a network map for you. Once that is done, you can check to see if your bridge is even connected to your AP by checking your AP's log to see recent events (like something connecting...). If the bridge is connecting, then this is a problem with your computer. If that bridge isn't connecting, reset it and try connecting it as a bridge using Dlink's manual's instructions.

[Mk.32]

We have not had the dual router setup in awhile... when we just do the robot router in AP mode i can connect to it fine with my laptop and run stuff. But we want the 2 router setup for demos/future use.

With the DS laptop we can ping the router plugged into the laptop, but not the robot/nor it's router. The two routers are not connection; so is there way to get the two router to talk to each other?

[shawnz]

Are you sure the robot router is not still configured with competition settings? Maybe try running them in reverse -- use the robot d-link as the AP, and the laptop d-link as the bridge.

[Mk.32]

We reset both routers and configured them as per the FRC doc... and we tried that as well to no advil...

[shawnz]

Originally Posted by Mk.32

we tried that as well to no advil...

Can you confirm that, when trying this, you did not use 10.36.47.1 for both devices, like it says to do in the manual, but rather gave one of the two d-links the IP address 10.36.47.4 (preferably the one connected to the laptop) instead?

[Mk.32]

Yes