|
|
|
 And then, at the end of the match, the drive teams who are being lifted all say at once (in a GOVERNATOR voice)- "GET TO ZE CHOPPER!!!" - Graham Donaldson [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| And then, at the end of the match, the drive teams who are being lifted all say at once (in a GOVERNATOR voice)- "GET TO ZE CHOPPER!!!" - Graham Donaldson [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
2012 FTC KOP for Lazy People?
Has anyone converted the 2012 FTC KOP for use with SolidWorks?
I know I can convert the Creo-format parts one by one, either by saving as STEP format in Creo, or by opening them directly in SolidWorks. However, either is a laborious process. Opening directly in SolidWorks appears impractical at best -- my poor ancient XP laptop has been cranking for ten minutes on one of the simple ones! Alternatively, the 2011 KOP appears to be available, but I'm worried it will be just different enough to drive us crazy. Thoughts?? 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode