|
|
|
 Having a spare arm that you can put on in 5 minutes or less intimidates the hardware into not breaking. - ChrisH [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Having a spare arm that you can put on in 5 minutes or less intimidates the hardware into not breaking. - ChrisH [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Re: Is Teflon legal?
First you should ask this question. What is the advantage of using Teflon over either a oil impreginated bronze bushing or a standard ball bearing?
What is the load that is going to be applied to this joint? Will the Teflon carry that load with a safety factor? What are the material properties of the Teflon I am using. http://www.ptfeparts.com/dupont/teflonlink8.htm |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
