|
|
|
 Funny, I came to robotics for the robot, but find I stay for the people. - Mr. Pockets [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Funny, I came to robotics for the robot, but find I stay for the people. - Mr. Pockets [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: Center to Center Distance in Power Transmission
You can look at this thread here for more options in calculating.
http://www.chiefdelphi.com/forums/sh...ad.php?t=98758 The formulas can be found here with an excel spreadsheet calculator: http://www.chiefdelphi.com/forums/sh...03&postcount=3 |
|
#2
26-10-2012, 23:13
|
||||
|
||||
|
Re: Center to Center Distance in Power Transmission
For belt C-C, I've been using a free program from Gates called Design IQ 3. It's a little quirky at first but once you figure it out it works well. It can handle different size pulleys and multiple tensioners and has a list of standard size belts. I've also used the SolidWorks belt/chain feature and the results match the Gates program.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
