Sheet Metal and Autodesk

[kramarczyk]

We've done Cardboard Aided Design in the past, although most notably for large plastic parts. The best example is our 2010 control board which we made for 1/8" ABS. We modeled what we wanted in Inventor and then mocked it up in cardboard to sense check ourselves and make sure that everyone understood what the end product would be like. The cardboard is a huge help.

Cardboard Mockup
https://picasaweb.google.com/finneyr...06561378797554

Sense Check
https://picasaweb.google.com/finneyr...06583701230130

Final Product
https://picasaweb.google.com/finneyr...13921786997378
https://picasaweb.google.com/finneyr...97045504596098