|
|
|
 geeez....and i was going to say they should knock a week off the build season. - johnr [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| geeez....and i was going to say they should knock a week off the build season. - johnr [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Turntable vs. Slew Bearing?
We at team 1768 are working on a pre-season training project. Since it is a training project we, decided to include a turn-table into our design. However, our team has no experience with turn-tables. We need to mount the arm from our 2011 robot onto a turntable. This is a low budget project, and we intend to only turn 180 degrees in each direction.
The question I have for you all, is what are the pros and cons of using a slew bearing versus a turntable? |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode