|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Re: Can we have a netbook on our robot?
Yes as long as it costs less than 400$ however it is hard to beat a beefey driver station laptop
Rule: [R14] No individual item shall have a value that exceeds $400.00. The total cost of Components purchased in bulk may exceed $400.00 USD as long as the cost of an individual Component does not exceed $400.00. Last edited by ferret_guy : 25-12-2012 at 21:29. |
|
#2
|
|||||
|
|||||
|
Re: Can we have a netbook on our robot?
Consider trying a co-processor like the BeagleBoard if you want to do this. 987 has a paper about using a PandaBoard that you'll find if you search CD-Media.
|
|
#3
|
|||||
|
|||||
|
Re: Can we have a netbook on our robot?
Go ahead and use a Netbook, but there are many lighter, cheaper alternatives.
|
|
#4
|
|||
|
|||
|
Re: Can we have a netbook on our robot?
Wait until the 2013 rules come out before you make a decision or purchase equipment.
|
|
#5
|
|||||
|
|||||
|
Re: Can we have a netbook on our robot?
If you follow the 2012 rules, then almost certainly yes.
We will not know the 2013 rules until January 5. You will have to read them to determine if a netbook is allowed on your competition robot. Last edited by DonRotolo : 26-12-2012 at 20:30. |
|
#6
|
||||
|
||||
|
Re: Can we have a netbook on our robot?
Last year we used a pico it on our robot' they are significantly more powerful than beagle boards or raspberry pi but about the same size
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|