|
|
|
 Maybe the lesson the internet is trying to teach us is to "Think before you post, the machine is watching and never forgets..." - IKE [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Maybe the lesson the internet is trying to teach us is to "Think before you post, the machine is watching and never forgets..." - IKE [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Legen-DAIRY Drive
Greetings CD,
One of our Seniors has been working very hard on a special project for FIRST Team 1086: Blue Cheese. We finally got the prototype completed tonight. I am very proud of what he has accomplished. I hope Alex or Electronica1, as he is known in ChiefDelphi, will answer any technical questions you may have. He will be posting our progress on this project at regular intervals. http://www.youtube.com/watch?v=QPBly...ature=youtu.be |
|
#2
04-01-2013, 22:06
|
||||
|
||||
|
Re: Legen-DAIRY Drive
Looks awesome, 1086! Can't wait to see more. Keep up the amazing work
 . |
|
#3
04-01-2013, 22:06
|
|||||
|
|||||
|
Re: Legen-DAIRY Drive
Last edited by Walter Deitzler : 04-01-2013 at 22:11. |
|
#4
04-01-2013, 23:23
|
|||||
|
|||||
|
Re: Legen-DAIRY Drive
I would personally be rather worried about that chain coming loose under load. I'd test that in some serious shoving matches before running with it in competition. I assume you're going to be optimizing the piston length to get the correct tension with the wheel down. I'd also look into arranging things so the tension on the chain has very little or negative leverage against your piston. That is, try to work things out so that pulling on the chain makes the wheel lock down, not pull up.
|
|
#5
28-02-2013, 22:56
|
||||
|
||||
|
Re: Legen-DAIRY Drive
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
(Hanging out with my buddies at 610)
Linear Mode
