|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||||
|
|||||
|
Outside of the frame perimeter
I cannot seem to find where it says how far we can extend outside of the frame perimeter, when not in starting configuration, all I can find is in the example of rule G29:
Quote:
|
|
#2
|
|||||
|
|||||
|
Re: Outside of the frame perimeter
Did you see the rule about the 54" cylinder? <G23>
|
|
#3
|
||||
|
||||
|
Re: Outside of the frame perimeter
As far as i know, all it says is that the robot cannot go outside of its 54in diameter.
|
|
#4
|
||||
|
||||
|
Re: Outside of the frame perimeter
The way i see it,
You can extend as far as you want as long as your robot is always in coherence with the 54" diameter size limit, and the 60"-84" height limit. |
|
#5
|
||||
|
||||
|
Re: Outside of the frame perimeter
Agreed. [G23] sums it up for horizontal direction, and [G22] otherwise.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|