Quote:
Originally Posted by akoscielski3
Sheet metal and the wall of your tubing has little difference when you are press fitting a bearing into it. you should be able to use the same sizes as that thread states.
|
Generally for FRC usage a thou under is enough.
The bigger issue is can you actually machine to that kind of tolerance?
A reamer would do it perfectly every time however just using say an endmill on a CNC machine you may be a few thou off due to tool wear causing a press fit to turn into a non fit.
Tragedies happened. We've learned from them, as individuals, as teams, as a community. - Taylor [more] 
Hybrid Mode
