How to connect to the cRIO

[Kevin Fort]

When you have the cRIO plugged into the computer that is working correctly can you tell what the IP address of the cRIO is? The imaging tool is probably the easiest way to tell what it is. When it is plugged in to the computer that doesn't work are you able to ping the cRIO at the IP address you found it at on the computer that works?

I definitely try with a cross over cable (as was mentioned above).

The NI thread Greg mentioned was an issue we had early last season and was fixed in an update mid-season. I wouldn't expect it to be an issue again this year.

If you don't get it up and running by tomorrow give us a call at 866-511-6285 from 1-7pm CST