|
|
|
 "In the next 5 years, the GDC will intermingle this 2012 game with the mechanics of 2009's game and it shall be called Space Jam." - Tetraman [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| "In the next 5 years, the GDC will intermingle this 2012 game with the mechanics of 2009's game and it shall be called Space Jam." - Tetraman [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Re: 2013 Field Pyramid Does not Match Manual Schematics
All,
Some comments. 1. Yes, it looks like Fusion is not importing correctly. As shown in another screen capture the pyramid is OK when opened in Inventor. 2. I have updated some constraint values as per the original thread and will repost on the community. Downlaod if you need a more accurate model. 3. An updated STEP file is attached to this thread. http://www.chiefdelphi.com/forums/sh...d.php?t=110680 4. If you are using STEP in a previous version of Inventor, select all the subassemblies in the browser. Right-click on the selection, and click Grounded. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
