Where is the full CAD of the field for the 2013 game?

[Brian Selle]

Originally Posted by inventor_phild

As Nathan indicated there is an Autodesk Inventor 2013 version of the field and a STEP version. I have atttached the STEP version to this post.

The major components are modeled such as the pyramids, goals, etc.

The 3rd level is now at the correct height but the corner tubes at the top are not correct. First image is the latest STEP file, second is the image from the field drawings.

[Aren Siekmeier]

Can anyone shed light on whether the Pro/E version of the pyramid has these dimension issues? It appears that somehow the Autodesk version is still consistent with the published drawings (I haven't checked to be sure), so perhaps it is. I haven't yet been able to import the Pro/E version into Solidworks, so if anyone who has seen the Pro/E version could check this out, that'd be appreciated.

[robobonobo]

The Autodesk Inventor model did correct the height of the pyramids per the other post discussion. (Thanks a ton for the quick turnaround Phil!). The current discrepancy is actually the base width of the pyramid being ~90" instead of 94. This lowers the intersection of the tubing make the top appear taller. I mistakenly thought the angle was wrong (60° instead of 68°) but I wasn't taking the projection in the angle measurement. This is noted in the other pyramid discussion thread.

[Jared Russell]

The ProE version appears to match the drawings and manual.

[Aren Siekmeier]

Since I had enough difficulty with the Inventor version, then failing to import the Pro/E version to Solidworks, then with installing Pro/E, then with getting it to render anything at all.... I figured I'd post a .step of the Pro/E exported from Pro/E for the rest of us looking for accurate pyramid CAD. This one also has complete alliance stations.

A STEP of the Pro/E version of the field can be found here.

[Brian Selle]

Originally Posted by compwiztobe

Since I had enough difficulty with the Inventor version, then failing to import the Pro/E version to Solidworks, then with installing Pro/E, then with getting it to render anything at all.... I figured I'd post a .step of the Pro/E exported from Pro/E for the rest of us looking for accurate pyramid CAD. This one also has complete alliance stations.

A STEP of the Pro/E version of the field can be found here.

I was headed down that same path... Thank You!

[roach1051]

Originally Posted by compwiztobe

Since I had enough difficulty with the Inventor version, then failing to import the Pro/E version to Solidworks, then with installing Pro/E, then with getting it to render anything at all.... I figured I'd post a .step of the Pro/E exported from Pro/E for the rest of us looking for accurate pyramid CAD. This one also has complete alliance stations.

A STEP of the Pro/E version of the field can be found here.

I tried to load the ProE step file you posted, but it is so large that my Inventor 2011 installation crashes for lack of virtual memory. Can you post a step of only the pyramid?

[inventor_phild]

Pyramid STEP file attached.

STEP files may lose their constraints when opened, so, in the browser, select all parts or assemblies and then click Grounded.

[Itamar]

Originally Posted by inventor_phild

Pyramid STEP file attached.

STEP files may lose their constraints when opened, so, in the browser, select all parts or assemblies and then click Grounded.

Hey Phil, just to make sure 100%, is that last Pyramid STEP file you posted accurate?

[inventor_phild]

Yes, I corrected the pyramid height last week and reposted. Contact me if you cannot locate it and I will email one.

[Itamar]

Originally Posted by inventor_phild

Yes, I corrected the pyramid height last week and reposted. Contact me if you cannot locate it and I will email one.

With so many links being posted... I would really appreciate it if you emailed me the correct file. My email is itamarnine4@gmail.com