|
Re: 2013 Kitbot Problems
Quote:
Originally Posted by MrTechCenter
We are trying to put together the 2013 kitbot drivetrain based on the instructions provided by FIRST. It appears that the spacers for the wheels are too small. Did we make a mistake or did FIRST send the wrong size spacers?
|
Harsh,
I was looking at it yesterday with Daniel. The first thing that needs to be done is swap the outer frame rail around on one side. It has the center drop hole on top, not the bottom.
Next, FOLLOW THE DIRECTIONS!!
We should be having one of the experienced students working with the newer students. (This is where I need a "Facepalm" emoticon.)
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|
We are all insane aren't we? I just want to build a robot now. :P - Lowfategg [more] 
Hybrid Mode
