|
|
|
 You can learn just as much from building a small robot as you can from a large bot because all of the key concepts are the same. - Greg Needel [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| You can learn just as much from building a small robot as you can from a large bot because all of the key concepts are the same. - Greg Needel [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||||
|
|||||
|
Pinions for BAG motors
These guys have a 4mm shaft (unlike the 3.2mm 500 can shaft, 5mm 700 can shaft, .125" FP shaft, and 8mm CIM/mini-CIM shaft). So far the only COTS pinion solution I have found is to get the VexPro Versaplanetary Motor Mounting Kit, but I'm not sure what the tooth count/DP are, and it comes with a bunch of other mounting hardware.
Does anyone have a good source for standalone COTS pinions for these guys? |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode