|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
Re: First time with an Axis Camera, need help getting started
There is a lighted ring around the lense of the camera-yellow while booting, green when operating.
You can test the Ethernet connect by browsing to the camer. Have you setup the camera using the FRC camera utility? |
|
#2
|
||||
|
||||
|
Re: First time with an Axis Camera, need help getting started
Thats what I read but I didn't see anything. Perhaps it's because its the camera included back in 2011's season (the M1011) or maybe I'm just blind
|
|
#3
|
|||||
|
|||||
|
Re: First time with an Axis Camera, need help getting started
Here are some pictures I found.
Including one of the back where there are green power lights. The back lights come on a couple of seconds after it gets power. The yellow light won't appear for 15 seconds. The green light appears after 45 seconds. Give or take. Last edited by Mark McLeod : 10-01-2013 at 18:03. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|