Windriver won't connect to cRIO target

[dowster]

Originally Posted by RufflesRidge

1) Make sure you've imaged the cRIO for C++
2) Make sure your IP is set to 10.XX.YY.ZZ where XXYY is your four digit team number and ZZ is anything not in use on the network (the cRIO is .2 and the D-Link if in use is .1, the camera is .11, a computer configured by the DS software is .5 wired and .9 wireless).
3) Try turning off any firewall on the PC

Thank you, I had forgotten that I had to re-image the cRIO for C++ (we had it on LabView.....). Also had to disable the firewall.

Thanks to everyone for the quick responses.